RFSJ—16 plastic extruding welder is a new kind of heat blast welder introducing the advanced international technology and being made with extractive technique. Moreover, its technical index has reached the standard of the foreign products with the same level and filled up the blank in China. Heat blast warm-up and the plastic welding rod are combined together to enhance the welding strength with their reasonable structure, convenient operation, continuous welding, high working efficiency and great extruding pressure, therefore they are the ideal products for welding and processing various thermoplasticity plastic.

This product combines the heat blast warm-up and the welding rod extrusion, the heat blast owns adjustable thermal temperature control and the automatic-sending wind supply, the extruding parts adopt advanced temperature control system. Furthermore, the extruding speed can be conveniently adjusted. Adoption of the screw style feed lets the welding have great extruding pressure and agile low temperature protection system. Adoption of the 220V alternating current supply can weld the thermoplasticity plastics, such as welding of the plastic panel and plastic tubing, especially for sealing of the winding tubing with hollow wall and large caliber, welding of the tubing welding and repairs of the tubing damage.

Technical Spec Order No. RFSJ-16
Voltage: 220V
Power Screw heating 600 W / drive motor 800 W / heat blast 1600 W
Temperature Wind Temperature20—650℃，Heating temperature while plastic extruding is 20—300℃
Warm-up heat blast volume 300L/min
Diameter of Welding Rod φ 3.0mm - φ 4.0mm
Thermoplasticity plastic HDPE, PP, PVDF, the PE can show the characteristic best.
It is forbidden to use for the plastic with electric conduction (PE-EL), which can bring electric conduction short circuit of the machine.
This machine is used for the fourth part of the barrel bath and the tube that accords to the standard of the DVS (Germany Welding Association).
It can once weld the welding line with width of more than 10mm and plastic board with thickness below 40mm.

Plastic tank welding